Netgear range extender is the best networking device to boost the existing WiFi range. But sometimes these range extenders create issues and one of the most common problems is the Netgear extender red light issue. If you are also facing the same problem and find a permanent solution then this article is for you. Here, we will discuss the troubleshooting hacks to eliminate this setback. So without any further ado let’s begin.
But before moving to the troubleshooting tips let’s discuss the reasons behind this problem. Once you are aware of the causes you can easily resolve the Netgear extender blinking red light.
Causes: Netgear Extender Red Light Issue
There can be several reasons why you are facing the Netgear extender red light issue. Here we will discuss the most common one.
- The internet connection is not strong.
- The Netgear extender and router are not placed within a range.
- The Ethernet cable connection is not finger-tight.
- Too many devices are connected to your WiFi device.
- Your Netgear wireless range extender is not getting enough power supply from the wall socket.
- Netgear extender setup is partial or improper.
- The extender is placed near the electronic devices.
Fixed: Netgear Extender Red Light Issue
-
Restart the Extender
The initial and one of the most common ways to get rid of technical problems is rebooting. It’s possible that it will also assist you in resolving the Netgear WiFi range extender red light issue. Therefore, follow the instructions below to learn how to power cycle the range extender:
- The first and foremost thing is to turn off your wireless range extender and unplug it from the electrical outlet.
- Next, hold on for a few seconds.
- Now, insert the Netgear extender into a well-working power socket and turn on the switch.
It should be noted that the reboot procedure is the same for all extenders whether you perform Netgear EX6120 setup or any other at home.
-
Verify the Cable Connection
The next way to troubleshoot the Netgear extender red light issue is by checking the Ethernet cable connection. There is a chance that the cable you use to connect the range extender and your home router is damaged. To avoid this problem, it is recommended that you replace the old cable with a brand-new one or connect your devices wirelessly.
-
Bring the WiFi Device Closer
If the cable connection is not the issue, the other step is to place the WiFi device closer. There is a possibility that the distance between the host router and the wireless range extender is too much. To troubleshoot this issue, bring the WiFi devices within a range. But not too close nor too far.
-
Check Power Supply
Another cause of the WiFi extender red light issue is the lack of power supply. To avoid this issue, be sure that the power adapter is appropriately connected to the extender and the wall socket. On the off chance there are any loose connections, try to fix them and see if this fixes the problem.
-
Avoid WiFi Interference
As we discussed earlier signal interference is one of the most common reasons for the Netgear extender red light issue. To eliminate this problem place your extender and host router away from metal objects, electronic devices, transmitted appliances, and reflexive surfaces.
Specifically, avoid positioning your extender close to mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, washing machines, baby monitors, Bluetooth speakers, and aluminum studs.
-
Reset Your Netgear Extender
If the issue still persists then no need to worry. We have one more solution to overcome this problem i.e. reset your WiFi range extender. If you are not sure how to reset Netgear extender then follow the steps given below.
- First of all, find the reset button on your Netgear wireless range extender.
- Once you locate it, press it carefully by using a sharp pointed object like a paper clip.
- Now, wait for a couple of seconds.
- After that, release the button.
Note: Keep in mind that after the reset process, all the personal settings reset to their factory default settings. Now, you need to perform the Netgear WiFi range extender setup from scratch.
Summing Up
With that! We conclude our written guide on how to fix the Netgear extender red light issue. We expect that by following the aforementioned troubleshooting tips and tricks you can easily resolve the problem in a hassle-free way.
